Differences

This shows you the differences between two versions of the page.

--- michka:research:microbial_fuel_cells:cardiff6 [2017-09-17 10:51] – michka
+++ michka:research:microbial_fuel_cells:cardiff6 [2017-09-17 11:20] – michka
@@ Line 3: / Line 3: @@
 **[[http://www.zprod.org|Paul Granjon]] & [[http://michkamelo.wordpress.com|Michka Mélo]], May 10th-13th, 2017, Cardiff**
-{{>https://www.flickr.com/photos/foam/37278347985/in/album-72157686272755070/ ?maxwidth=800}}\\
+{{>http://www.flickr.com/photos/foam/37278347985/  ?maxwidth=600}}\\
 ====0. Abstract====
@@ Line 18: / Line 18: @@
 ====1. Home-made Microbial Fuel Cells (MFCs)====
+{{>http://www.flickr.com/photos/foam/36440367724/  ?maxwidth=600}}\\
 ===1.1 Material list===
    * Graphite powder (Inoxia Ltd, via Ebay)
+{{>http://www.flickr.com/photos/foam/37087494326/  ?maxwidth=600}}\\
    * Graphite rods (scholar stuff)
+{{>http://www.flickr.com/photos/foam/37087470986/  ?maxwidth=600}}\\
    * Wool (old blanket)
+{{>http://www.flickr.com/photos/foam/37087483846/  ?maxwidth=600}}\\
    * FeO2 powder for ceramicists (via Ebay)
+{{>http://www.flickr.com/photos/foam/37087498876/  ?maxwidth=600}}\\
    * Inox wire (Amazon, for DIY jewel-makers)
+{{>http://www.flickr.com/photos/foam/37087499966/  ?maxwidth=600}}\\
    * Food tupperwares with clipping lids (Amazon)
+{{>http://www.flickr.com/photos/foam/36440366634/  ?maxwidth=600}}\\
 ===1.2 MFC composition===
@@ Line 35: / Line 56: @@
 Layer by layer, from bottom to top, we have :
    * serpent-shaped (about 10 crossings across the tupperware) inox wire, with a vertical section insulated with the black (-) plastic cover of a reclaimed multi-fiber wire
+{{>http://www.flickr.com/photos/foam/37087499966/  ?maxwidth=600}}\\
      * 1-cm-thick layer of graphite powder, mixed with water
+{{>http://www.flickr.com/photos/foam/36440361484/  ?maxwidth=600}}\\
      * (soaked) wool membrane
+{{>http://www.flickr.com/photos/foam/36880233410/  ?maxwidth=600}}\\
      * mud
+{{>http://www.flickr.com/photos/foam/37087491486/  ?maxwidth=600}}\\
      * (soaked) wool membrane
-     * serpent-shaped (about 10 crossings across the tupperware) inox wire, with
-     * 1-cm-thick layer of graphite powder, mixed with water, with a vertical section insulated with the grey (+) plastic cover of a reclaimed multi-fiber wire
+{{>http://www.flickr.com/photos/foam/37087500946/  ?maxwidth=600}}\\
+     * serpent-shaped (about 10 crossings across the tupperware) inox wire, with a vertical section insulated with the grey (+) plastic cover of a reclaimed multi-fiber wire
        * A small bit of red mono-fiber wire is woven around the (+) electrode wire to clearly distinguish it from the (-) electrode wire
+     * 1-cm-thick layer of graphite powder, mixed with water
+{{>http://www.flickr.com/photos/foam/36440362364/  ?maxwidth=600}}\\
      * both electrode wires are interwoven on the top to avoid the top (+) electrode to sink away from oxygen
+{{>http://www.flickr.com/photos/foam/37087471336/  ?maxwidth=600}}\\
      * a small opening is cut on side of the lid with a cutting clamp to let the electrode wires go through towards the circuit
      * the lid is drilled with