Differences

This shows you the differences between two versions of the page.

--- michka:research:microbial_fuel_cells:marseille3 [2014-10-03 13:38] – michka
+++ michka:research:microbial_fuel_cells:marseille3 [2014-10-08 14:28] – michka
@@ Line 6: / Line 6: @@
 __Design features__
-   * **Substrate**: topsoil gathered from La Friche's garden - two days before assembly - inoculated with 10 mL of clay gathered in Niolon on the day of assembly.
+{{ :michka:research:microbial_fuel_cells:dscf6377.jpg?300 |Clay Sampling Location - Niolon, France}}
+Clay sampling spot - Niolon, France.
+   * **Substrate**: topsoil gathered from La Friche's garden - two days before assembly - inoculated with 10 mL of clay gathered in Niolon (picture above) on the day of assembly.
      * Volume: 80*30*2 cm3
    * **Container**: crate, covered with a transparent garbage plastic bag.
@@ Line 25: / Line 30: @@
 ====Crate Design #2====
 __Design features__
@@ Line 57: / Line 61: @@
      * Current starts at 0.7mA and drops to 0.3mA in about 15 minutes too.
-**Peak Power Measured**: 65 microW.
+Performances on Day3:
-**Max (stable) Power Measured**: 39 microW
+   * **Voltage**: around 250 mV, stable.
+   * **Current**: around 1.5 mA peak, decreasing slowly, stabilized around 0.60 mA.
+Performances on Day4:
+   * **Voltage**: around 350mV, stable.
+   * **Current**: around 1 mA.
+**Peak Power Measured**: 375 microW.
+**Max (stable) Power Measured**: around 350 microW.
+====Pile Microbienne Marseillaise====
+{{ :michka:research:microbial_fuel_cells:dscf6391.jpg?300 |}}
+__Design features__
+{{ :michka:research:microbial_fuel_cells:dscf6389.jpg?300 |}}
+Marine sediments sampling spot - Marseille, France
+   * **Substrate**: sea sediments gathered ten meters from the Catalan beach in Marseille on the day of assembly.
+     * Volume: 0.5L
+   * **Container**: 2L plastic bottle.
+   * **Proton Exchange Membrane**: a piece of cardboard.
+     * Surface: the bottle's section (diameter of 6-8 cm).
+   * **Water**: seewater.
+   * **Anode**: copper covered with carbon, extracted from a dead DELL PC battery found in the LFO storage space.
+     * Surface: 50*5 cm2
+   * **Cathode**: copper covered with less carbon, scrap from the [[michka:research:supercapacitors|supercapacitors]] experiment.
+     * Surface: 20*5 cm2
+__Performances__
+Performances on Day0:
+   * **Voltage**: about 13mV
+   * **Current**: about 0.1 mA
+Performances on Day1:
+   * **Voltage**: about 110mV
+     * **Current**: starting at 7 mA ! And dropping slowly
+**Peak Power Measured**: 770 microW
+__Observations__
+Even though the multimeter was connected the wrong way (+ on anode, - on cathode), we first had positive (and quite high) current and voltage value. Is this due to remanant charges from the PC battery ?