Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 18.191.223.197
Lock expires at: 2024-07-03 05:53 (9 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=== reprap construction ===
various notes/changes/clarifactions/etc+ of the [[reprap]] plans, made during the [[fabbing workshop]] oct.2007
  * electronics
    * BOM specifies 648A pics, boards have 628 printed.
  
=== difficulties / / subsitutions ===
  * toothed pulleys & MXR belt 
  * molex connectors (nos. 22-01-3127, 22-23-2021, 22-01-3027, 22-23-2031, 22-01-3037, 22-23-2041, 22-01-3047, 08-50-0114)
  * board mount db9 female
  * z-studding-tie 
  * threaded drive shaft

=== software ===
see [[reprap software]]

=== assembly ===
  * board holes -> mounting pieces mismatch
  * check m5x20 and m5x30 count
  * 12pin header fr power distribution
  * nichrome length ~370mm
  * cabling lengths (?)
  * see annotated howto print-out

=== calibration / configuration ===
  * extruder tester getting IO errors, consistently at 96ºC wont report higher temperatures.
  * extruder notes ->
    * http://hydraraptor.blogspot.com/2007/09/equations-of-extrusion.html
    * the previous version of the thermopast extruder (aka MkII) > http://www.reprap.org/bin/view/Main/ThermoplastExtruder